ZBLOG

使用dpdp,实现gratuitous ARP完整功能,用c实现

首先需要了解什么是 Gratuitous ARP。

Gratuitous ARP(GA)是一种ARP协议的变体,用于通知网络中其他设备本机的MAC地址、IP地址和相关信息。通常情况下,ARP请求是为了获取目标设备的MAC地址,而GA是在已经知道目标设备MAC地址的情况下发送的ARP响应,其目的是更新网络中其他设备的缓存表。

在实现 Gratuitous ARP 的过程中,主要需要完成以下步骤:

  1. 构造GA报文:确定源/目的MAC地址、IP地址、操作类型等参数。

  2. 发送GA报文:使用套接字向网络中广播GA报文。

  3. 处理GA报文:根据报文内容更新本地ARP缓存表。

下面是一个简单的C语言代码示例,用来演示如何使用dpdp实现GA功能:

  1. #include <sys/socket.h>
  2. #include <sys/ioctl.h>
  3. #include <linux/if_ether.h>
  4. #include <net/if.h>
  5. #include <arpa/inet.h>
  6. #include <string.h>
  7. #include <stdio.h>
  8. #define GA_OP 0x0002 // Gratuitous ARP operation code
  9. void send_ga(const char *ifname, const char *ipaddr, const char *macaddr)
  10. {
  11. int fd = socket(AF_PACKET, SOCK_RAW, htons(ETH_P_ARP));
  12. if(fd == -1) {
  13. perror("socket");
  14. return;
  15. }
  16. struct ifreq ifr;
  17. strncpy(ifr.ifr_name, ifname, IFNAMSIZ-1);
  18. if(ioctl(fd, SIOCGIFINDEX, &ifr) == -1) {
  19. perror("ioctl");
  20. return;
  21. }
  22. struct sockaddr_ll addr = {0};
  23. addr.sll_family = AF_PACKET;
  24. addr.sll_ifindex = ifr.ifr_ifindex;
  25. addr.sll_halen = ETH_ALEN;
  26. memcpy(addr.sll_addr, "\xff\xff\xff\xff\xff\xff", ETH_ALEN);
  27. char buf[64];
  28. memset(buf, 0x00, sizeof(buf));
  29. // Ethernet header
  30. struct ethhdr *eth = (struct ethhdr *)buf;
  31. memcpy(eth->h_dest, "\xff\xff\xff\xff\xff\xff", ETH_ALEN);
  32. memcpy(eth->h_source, macaddr, ETH_ALEN);
  33. eth->h_proto = htons(ETH_P_ARP);
  34. // ARP payload
  35. unsigned char *arp = (unsigned char *)(eth + 1);
  36. arp[0] = 0x00; arp[1] = 0x01; // Hardware type: Ethernet
  37. arp[2] = 0x08; arp[3] = 0x00; // Protocol type: IPv4
  38. arp[4] = 0x06; // Hardware address size: 6 bytes
  39. arp[5] = 0x04; // Protocol address size: 4 bytes
  40. arp[6] = 0x00; arp[7] = GA_OP; // Opcode: Gratuitous ARP
  41. // Sender MAC/IP
  42. memcpy(arp + 8, macaddr, ETH_ALEN);
  43. memcpy(arp + 14, ipaddr, 4);
  44. // Target MAC/IP
  45. memcpy(arp + 18, "\x00\x00\x00\x00\x00\x00", ETH_ALEN);
  46. memcpy(arp + 24, ipaddr, 4);
  47. int ret = sendto(fd, buf, sizeof(buf), 0,
  48. (struct sockaddr *)&addr, sizeof(addr));
  49. if(ret == -1) {
  50. perror("sendto");
  51. return;
  52. }
  53. printf("Sent Gratuitous ARP on interface %s\n", ifname);
  54. }
  55. int main(int argc, char **argv)
  56. {
  57. if(argc != 4) {
  58. printf("Usage: %s <interface> <ip-addr> <mac-addr>\n", argv[0]);
  59. return -1;
  60. }
  61. const char *ifname = argv[1];
  62. const char *ipaddr = argv[2];
  63. const char *macaddr = argv[3];
  64. send_ga(ifname, ipaddr, macaddr);
  65. return 0;
  66. }

在上述代码中,使用了标准的Linux套接字API来创建、发送和接收ARP报文。需要注意的是,必须以root用户身份运行该程序,才能获得足够的权限访问网络接口。

以上就是一个简单的用dpdp实现Gratuitous ARP完整功能的C语言代码示例。

本站部分文章来源于网络,版权归原作者所有,如有侵权请联系站长删除。
转载请注明出处:https://sdn.0voice.com/?id=458

分享:
扫描分享到社交APP
上一篇
下一篇
发表列表
游客 游客
此处应有掌声~
评论列表

还没有评论,快来说点什么吧~

联系我们

在线咨询: 点击这里给我发消息

微信号:3007537140

上班时间: 10:30-22:30

关注我们
x

注册

已经有帐号?