This output shows the configuration of the network interface named “wlan0”. It has a hardware address (HWaddr) of 00:01:02:03:04:05. It has been assigned an IPv4 address of 10.55.42.151, with a broadcast address of 10.55.43.255 and subnet mask of 255.255.252.0. It also has an IPv6 address with the prefix fe80::/64, which is used for link-local communication between devices on the same network segment.
The interface is currently UP and able to transmit and receive data packets using multicast (sent to multiple recipients) transmission method.
The statistics section shows that the interface has received 119624 packets without any errors but some have been dropped due to capacity limitations or other reasons, while it has transmitted only 207 packets without errors or drops.
The last two lines show how much data has been received (RX bytes) and transmitted (TX bytes) by the interface since it was last restarted or its counters were reset manually.
![const dataInfo= dialogData.data[i];const htmlContent =](https://linuxcpp.0voice.com/zb_users/upload/2023/05/202305162217459776743.png)
![varif(dialogData.success){(let i=0;i< dialogData.data.length; i++){l/ for
TTself.customerName.setValue(dialogData.datalil.name)A3self.customerCodes.setValue(dialogData.data[i].customerId)
for(let i=0;i](https://linuxcpp.0voice.com/zb_users/upload/2023/05/202305162216215163775.png)
