ZBLOG

Linux kernel how to config KSZ9893RNXI

As an AI language model, I do not have personal experience with configuring hardware. However, you can follow the steps below to configure KSZ9893RNXI in the Linux kernel:

  1. Download and extract the latest version of the Linux kernel source code.

  2. Navigate to the root directory of the extracted source code.

  3. Run the command “make menuconfig” to open the kernel configuration menu.

  4. Use the arrow keys to navigate to “Device Drivers” and press Enter.

  5. Navigate to “Network device support” and press Enter.

  6. Navigate to “Ethernet driver support” and press Enter.

  7. Select “Micrel KSZ series Ethernet support” and press Enter.

  8. Select “KSZ9893RNXI” and press Enter.

  9. Choose appropriate configuration options for your specific use case, such as PHY interface, interrupt handling method, and DMA channel.

  10. Save your configuration and exit the menu.

  11. Build and install the kernel image with your new configuration.

  12. Boot your system with the updated kernel image and verify that the KSZ9893RNXI is recognized and functioning properly.

本站部分文章来源于网络,版权归原作者所有,如有侵权请联系站长删除。
转载请注明出处:https://sdn.0voice.com/?id=333

分享:
扫描分享到社交APP
上一篇
下一篇
发表列表
游客 游客
此处应有掌声~
评论列表

还没有评论,快来说点什么吧~

联系我们

在线咨询: 点击这里给我发消息

微信号:3007537140

上班时间: 10:30-22:30

关注我们
x

注册

已经有帐号?